OTHER Details

    Lumber is "Rough Sawn", directly "off the sawmill"

    Lumber is considered "Green" and IS NOT air-dried, kiln dried, heat

    treated, sterilized, graded, or stamped.

    Lumber is untreated and unfinished.  Lumber may have "saw marks".

    Lumber may contain "Defects" and we offer No Guarantees of any kind.

    Lumber may contain some "wane" (rounding or bark on the edges) 

    unless you specifically say No Wane.

    Lumber order may be "Sticker-Stacked, "Dead-Stacked", and / or

    banded when picked up (depending on pick up schedule)

    Lumber lengths will be 2" - 8" longer than the length stated and the 

    ends will not be squared off.   

    NOTE:  In regards to lumber size, we highly recommend you have us

                 "Over-Size" your lumber to account for defects such as sawing

                 defects, lumber shrinkage, minor size differences, stresses in the

                 lumber and allow plenty of extra for drying, flattening, planing,

                 sanding, and finishing down to your desired size needed.

                 Again, this is "ROUGH Sawn" lumber off the sawmill and not

                 a finished product!

   Furthermore:  If lumber is to be used for Support Structures of any kind,

                            please consult local officials, an engineer / architect, 

                            insurance company, mortgage holder, your tradesman,

                            your end-user, and/or other to get their approval to use

                            green, rough sawn, ungraded, un-stamped lumber on

                            your project.  

​

​

​

​

​

We DO NOT stock any inventory at all.

All lumber sales will be milled as ordered and paid for in advance

Minimum order sizes will apply and lead time required.  We do not sale just 1 - 2 boards at a time.....We Have MINIMUMS!

Lumber will be "Rough Sawn", "Green", freshly milled

​

​

​Limited "Other Species" 

Oak, ​Elm, Sweetgum

Eastern Red Cedar

As of April 2022  -  Stayed Tuned for More Details

Lumber Sizes

   Although we can mill just about any sizes you'd want, here are     

   EXAMPLES of typical lumber sizes customers want

   Cedar   1x4, 1x6, 1x8, 1x10

                 Lengths 8, 10 foot 

   Pine     1x4, 1x6, 1x8. 1x10, 1x12

                2x4, 2x6, 2x8, 2x10, 2x12

                Lengths 8, 10, 12 foot 

   We can mill  3/8", 1/2", 5/8", 3/4" , 7/8" as well just to give you an idea

   Post  & Beams:   4x8, 5x5, 6x6, 6x10, 8x8, 10x10, 12x12

                                Lengths 8, 10, 12, 16, 20 foot

                                Other sizes & lengths limited availability 

   Prices:    I will send you prices when you send me a quote request.

​

​

L2  Sawmill 

LDE Company, LLC     dba:  L2 Sawmill

Portable Sawmill Service 

in East Texas

Pine

We are "select cutting" our property in New Summerfiled for the overall Health of our property and to replant it.  Rather than have a logger pay us pennies on the dollar and destroy our property for cleanup, we are small scale logging it ourselves and will turn our logs into profitable lumber to sell. 

Followed up by replanting to insure a beautiful and sustainable resource.

Please read ALL below as it will answer most all your questions

   Lumber Order Information  -  CONTACT US:

   email us at eitel15.3@gmail.com 

   or reach us under the "CONTACT" tab above

   Please let us know what you need:

   PineorCedar as well as the Thickness, Width and Length and Quantity

   Please include your Name, Phone #, and Intended Use for the lumber.

   I may call or email for more information and/or I will send you and estimated 

   cost and an ETA to complete the order.   

   Note:  Minimum order is 150 Board Feet

               Examples of 150 board feet:                  23)  2x4x10

               (approximate "Nominal" Sizes)               Or     18)  1x10x10

                                                                     Or     19)   2x6x8

                                                                     Or     38)  1x6x8   

​

​

   ALL Orders Require

    75% payment up front and 25% once milled  (for common sizes)

  100% payment up front on "Unique / Custom" sizes

   Pick Up of order is required ASAP of order being milled

   Location is out by Lake Striker on FM 2420

​    "Minimum" of 10-days Lead Time from placing/paying for the order and

    picking up the order at the mill.  Could be longer.  We will give an ETA.

    All Sales Are FINAL.  No Cancellations or refunds once order is placed

    and paid for.

    Sales Tax does apply unless you furnish your AG Exempt form before

    the order is placed

    Cash or Check only.

​

    Can pay at, or mail payment to, my office to get order started   

​

​